Canon iPF750 Základní průvodce stáhnout pdf (Strana 35)

Error Messages

No ink tank loaded. There is no Ink Tank in the printer. Load or reload the Ink Tank .

There is a problem with the Ink

Tank .

Replace it with a new Ink Tank .

Wrong ink tank. The Ink Tank in the printer is

incompatible.

Load an Ink Tank specified for use with the printer.

(→

, Replacing Ink Tanks)

(→

, Replacing Ink Tanks)

(→

, Replacing Ink Tanks)

Error Message Cause Corrective Action

Top cover is open. The printer has detected that the

Top Cover is open.

Open the Top Cover fully, remove any foreign objects,

and close the Top Cover again.

If the error occurs again, close the Top Cover , turn off

the printer, and wait a while before restoring power.

Sheet printing is selected. You have attempted to print a test

print sheet or other printer status

information on a sheet, but no

sheet is loaded.

Press ▲ or ▼ to select Load Cut Sheet , and then

press the OK button. Load the sheet, and then print.

To print on rolls, follow these steps.

Regular printing is selected, but

a roll is loaded.

A print job for printing on sheets

was sent when a roll is loaded.

Press ▲ or ▼ to select Remove Roll Paper , and

then press the OK button to stop printing.

After removing the roll, load and print on a sheet of

the type and size of paper you have specified in the

printer driver.

(→

, Removing the Roll from the Printer)

(→"Loading and Printing on Sheets," User Manual)

(→"Loading and Printing on Rolls," User Manual)

Remaining level of the ink

cannot be correctly detected.

Ink level detection cannot work

correctly if you use refill ink tanks.

The refill ink tank can no longer be used. See the

section " Ink level detection " and take the appropriate

action. (→"Ink Level Detection," User Manual)

Do not pull out ink tank. The remaining ink level could not

be correctly detected.

Install the Ink Tank that was removed.

Press ▲ or ▼ to select Stop Printing , and then

press the OK button to stop printing.

Load a roll and try printing again.2.

Check printed document. The Printhead nozzles are

becoming clogged.

If printing is faint, clean the Printhead .

(→

, If Printing is Faint)

The buzzer will stop once the error is cleared.

Error in cutter position. The Cutter Unit stops in the

middle of cutting.

Push the Release Lever back and remove the

paper.

Pull the Release Lever forward.2.

(→"Loading and Printing on Sheets," User Manual)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 51 52

Komentáře k této Příručce

Žádné komentáře

Canon iPF750 Základní průvodce Strana 35

Komentáře k této Příručce

Související produkty a manuály pro Tisk a skenování Canon iPF750