Canon EOS 10D - Digital Camera SLR Manuál s instrukcemi Strana 22

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 183
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 21
22
Recharging the Battery
Connect the power cord.
Connect the power cord to the charger.
Connect the power plug to an AC outlet.
1
Remove the cover.
Store the cover in a place where it will not be lost.
If you remove the battery from the camera, be sure
to reattach the cover to protect against short circuit.
2
Attach the battery.
Align the battery’s top edge with the <
> mark on
the charger. While pressing down the battery, slide
it in the direction of the arrow.
To detach the battery, follow the above procedure in
reverse.
3
Recharge the battery.
s
When the battery is attached to the charger,
recharging starts automatically and the red lamp
starts blinking.
s
A completely exhausted battery takes about 90
minutes to almost fully recharge.
The blinking frequency of the red lamp indicates the
progress of the recharging.
s
After the battery recharging is almost com-
pleted, the red lamp will stop blinking and
remain lit. Recharging the battery for another
hour will fully recharge the battery.
After recharging the battery, detach it and unplug
the power cord from the power outlet.
4
Battery charge
0–50%
50–75%
Over 75%
Almost full
Red lamp
Blinks once per
second
Blinks twice per
second
Blinks three times
per second
Stays on
<
> mark
Zobrazit stránku 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 182 183

Komentáře k této Příručce

Žádné komentáře