Canon imagePROGRAF iPF750 Basic guide No.3 Uživatelský manuál Strana 146

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 742
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 145
Handling rolls
Eject (waiting for ink to dry after printing)
Important
When cutting wide printed documents after ejection, have two people support the documents. If the
paper drops, printed documents may be damaged.
Do not lift the paper when holding printed documents before cutting. If the paper rises, it may af fect
the printing quality or cause rough cut edges.
1. On the T ab Selection screen of the Control Panel , press or to select the Paper tab ( ).
Note
If the T ab Selection screen is not displayed, press the Menu button.
2. Press the OK button. The Paper Menu is displayed.
3. Press or to select Paper Details , and then press the OK button.
4. Press or to select the type of paper , and then press the OK button.
5. Press or to select Cutting Mode , and then press the OK button.
6. Press or to select Eject , and then press the OK button.
7. Starts printing.
When printing is nished, the printer will stop without cutting.
8. Holding the printed document to prevent it from dropping, press the Cut button to cut the roll.
130 Handling Paper
Zobrazit stránku 145
1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 741 742

Komentáře k této Příručce

Žádné komentáře