Canon EOS-1D Mark IV Uživatelský manuál

CanonEOS-lMark iV

Index to FeaturesPower• Battery• Chargingp.28• Calibrationp.30• Battery check > p.35• Battery information p.247• Power outletp.33• Auto power off *

When Autofocus FailsAutofocus can fail to achieve focus (the focus confirmation light <•> blinks) with certain subjects such as the following:Su

DRIVE: Selecting the Drive Mode 1Press the <AF*DRIVE> button.(66)Select the drive mode.• While looking at the top LCD panel, turn the <0^ dia

Using the Self-timer----------~7^Press the < AF*DRIVE> button.(66)Select either <0’‘’> or <ci) 2>.• Look at the top LCD panel and t

Exposure ControlSelect the shooting mode to suit the subject or shooting objective. You can set the shutter speed and/or aperture to

Selecting the Metering ModeYou can select one of four methods to measure the subject brightness.Press the button. (5>6)/ □□□□□□□' ODODinjgDDn

Multi-Spot MeteringWith multiple spot meter readings, you can see the relative exposure levels of multiple areas in the picture and set the exposure t

P: Program AEThe camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE.* <P> stan

P: Program AETake the picture.• Compose the shot and press the shutter button completely.4»-\-i-/--\-i-/_I \If the “30"' shutter speed and t

Tv: Shutter-Priority AEIn this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the correct exposure suiting t

.\.UHTv: Shutter-Priority AEIf the maximum aperture biinks, it indicates underexposure.Turn the dial to set a slower shutterspeed until the aperture

Index to FeaturesDriveImage playback« Drive modesp.101 • Image review time^ p.181• Maximum burst-» p.62 • Single image displayp.1569 Self-timerp.102 •

Av : Aperture-Priority AEIn this mode, you set the desired aperture and the camera sets the shutter speed automaticaliy to obtain the correct exposure

oAv: Aperture-Priority AEIf the “30"" shutter speed blinks, it indicates underexposure.Turn the dial to set a larger aperture (lower f/numbe

M: Manual ExposureIn this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicat

IS Exposure CompensationExposure compensation can increase (brighter) or decrease (darker) the standard exposure set by the camera.You can set the exp

% Auto Exposure Bracketing (AEB)By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±3 stops in 1/3-stop i

1Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take muitipie shots at the same exposure se

Bulb ExposuresWhen bulb is set, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutt

Bulb ExposuresUsing the Eyepiece ShutterIf you take a picture without looking at the viewfinder, iight entering the eyepiece can throw off the exposur

Ky^ Mirror LockupAlthough using the self-timer or Remote Switch can prevent camera shake, using mirror iockup to prevent camera vibrations (mirror sho

V Flash PhotographyEOS-dedicated, EX-series SpeedlitesAn EX-series Speedlite (sold separately) makes flash photography as easy as shooting without fla

Handling PrecautionsCamera Care• This camera is a precision instrument. Do not drop it or subject it to physical shock.• The camera is not waterproo

V Flash PhotographyUsing Non-EX-series Canon Speedlites• With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL autofiash mode, the fiash can be

Setting the FlashWhen an EX-series Speedlite (such as the 580EX II, 430EX II, and 270EX) settable by the camera Is attached, you can use the camera’s

Setting the FlashFunctions settable under [Flash function settings]On the screen, the settable functions and what’s displayed will differ depending on

• FEBWhile the flash output is changed automaticaliy, three flash shots are taken. For details, see the instructions for FEB (Flash Exposure Bracketi

Setting the FlashFlash C.Fn Settings1 Select [Flash C.Fn settings].* Turn the <0> dial to select [Flash C.Fn settings], then press <©>. “

Live View ShootingYou can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting.”Live View shooting is effecti

d Preparing for Live View ShootingThis sets the camera for Live View shooting of stili photos. To shoot movies, see page 141.Select [Live View/Movie f

A Live View ShootingOaSelect the shooting mode.• Press the <MODE> button and turn the <£S/0> dial to select the shooting mode.Focus the su

Û Live View ShootingINFO. About the Information Display• Each time you press the <INFO.> button, the information display will change.Image size-

AShooting Function SettingsAs with normal shooting through the viewfinder, while the Live View image is displayed, you can still use the camera button

Handling PrecautionsLCD Panel and LCD Monitor• Although the LCD monitor is manufactured with very high precision technology with over 99.99% effectiv

Menu Function Settings mmmmmmmmmDuring the Live View display, you can stiii set the menu options. Live View functions are listed below.Under the [fr&a

Using AF to FocusSelecting the AF ModeThe AF modes available are [Live mode], [X' Live mode] (face detection, p.132), and [Quick mode] (p.136).If

Using AF to FocusFocus the subject.• Aim the AF point over the subject and press the shutter button haifway.► When focus is achieved, the AF point wi

Using AF to FocusFocus the subject.• Press the shutter button halfway and the camera will focus the face covered by the <; > frame.► When focus

Using AF to Focus51 • When you press <i*J> straight down, it will switch to the Live mode (p.131). You can tilt <i;J> to move the AF point

Using AF to FocusShooting conditions which can make focusing difficuit;• Low-contrast subjects such as the blue sky and solid-color, flat surfaces,•

Using AF to FocusQuick Mode:The dedicated AF sensor is used to focus in the One-Shot AF mode (p.95), using the same AF method as with viewfinder shoot

Using AF to FocusFocus the subject.• Aim the AF point over the subject and press the shutter button halfway.► The Live View image will turn off, the r

Focusing Manually mmmmmmmmmmmYou can magnify the image and focus preciseiy manuaily.Magnifying frameAE lock Magnified area position MagnificationSet t

OLive View Shooting CautionsNotes About the Live View Imagee Under low or bright light conditions, the Live View Image might not reflect the brightnes

Quick Start GuideInstall the battery, (p.32)Take off the cap and insert a fully- charged battery. To charge the battery, see page 28.Attach the lens,

Notes About the Shooting Results• When you shoot with the Live View function at high ISO speeds, noise (horizontai banding, dots of iight, etc.) or i

Shooting MoviesThe Live View image can be recorded to the card as a movie. A movie can be shot with automatic exposure or manual exposure. The movie r

live View/MovIe func. set.LV O/'# set.StillsAF modeLive modeGrid display OffExpo, simulation EnableMetering timer 15 sec.IPreparing to Shoot Movi

Shooting MoviesAutoexposure ShootingWhen the shooting mode is set to a shooting mode other than <M>, autoexposure controi wiii take effect to fi

’W Shooting Movies0 • During movie shooting, you can iock the exposure (AE iock) by pressing the < )( > button (p.115). After appiying AE look d

Shooting Movies<1fflSet the shutter speed andaperture.• Press the shutter button halfway and check the exposure level indicator.• Turn the dial

‘W Shooting MoviesAbout the ISO speed during manual exposure• The ISO speed can be set to [AUTO] (A) or within ISO 100-12800 in 1/3-stop increments.•

Shooting MoviesNotes for autoexposure and manual exposure shootingoThe camera cannot autofocus continuously like a camcorder.During movie shooting, do

Shooting MoviesINFO. About the Information Display® Each time you press the <INFO.> button, the information dispiay wiil change.Movie shooting r

Shooting MoviesTaking Still Photos During Movie Shooting(IYou can take a still photo at anytime by pressing the shutter button completely, even during

Quick Start GuideOur al arrmiCleir catMra settings -Cantel « [Set the camera to the default settings, (p.53)On the menu screen under the [♦ ] tab, s

' Shooting MoviesQ • For continuous shooting of stili photos during movie shooting, using a high-speed CF card compatible with UDMA transfers is

Menu Function SettingsDuring movie shooting, you can stili set the menu options. Movie shooting functions are iisted below.1 Uvc Vlew/Wwit^fic, Mlfut-

Menu Function SettingsTotal Movie Recording Time and File Size Per Minute (Approx.)Movie-recordingSizeTotal Recording TimeFile Size4GB Card16GB Card19

Movie Shooting CautionsRecording and Image Quality• If the attached lens has an Image Stabilizer, the Image Stabilizer will operate at all times even

Camera’s internal temperature increase and image degradation• When you shoot movies at high ISO speeds, noise (horizontal banding, dots of light, etc

Image PlaybackThis chapter explains how to playback and erase photos and movies, how to view them on a TV screen, and other playback-related functions

B Image PlaybackSingle Image DisplayPlayback the image.• Press the <CEI> button.► The last captured image or last Image viewed will appear.Selec

B Image PlaybackINFO. Shooting Information DisplayFE Microadjustment Exposure compensation amount —, Flash exposure compensation amount - Aperture-Pro

H Image PlaybackSample HistogramsDark image• About the AF Point DisplayWhen the [E‘ AF point disp.] menu option is set to [Enable], the AF point whic

HE Searching for Images QuicklyQ. Display Multiple Images on One Screen (Index display)Search for images quickly with the index display showing four o

Nomenclature16

B Searching for Images Quicklyii Jump through Images (Jump display)With the single image display, you can turn the <iS> dial to jump through the

Magnified ViewMagnified area positionYou can magnify the image by 1.5x to lOx on the LCD monitorMagnify the image.• During image playback, press the

iSi Rotating the ImageYou can rotate the displayed image to the desired orientation.Protect images RotateErase images Print order image copySelect [Ro

Enjoying MoviesBasically, there are the following three ways to playback the movies you shot.Playback on a TV set (pi70, i7i)(IUse the provided stereo

Enjoying MoviesPlayback and Editing with a Personal Computer(See the PDF file instruction manual for ZoomBrowser EX/lmageBrowser)The movie files recor

Playing Movies^ Playback the image.• Press the <CE1> button to playback images.Select a movie.• Turn the <0> dial to select an image.• W

Playing MoviesFunction Playback Descriptioni) ExitReturns to the single-image display.► PlayPressing <©> toggles between play and stop.Slow moti

Editing the Movie’s First and Last Scenes You can edit out the first and iast scenes of a movie in 1-sec. increments.iOn the movie playback screen,se

lAhillj Slide Show (Auto Playback)You can playback the images in the card as an automatic slide show.Select [Slide show],* Under the [B‘] tab, select

iwiaflB Slide Show (Auto Playback)Set the play time and repeat option.Turn ihe <0^ to select [Sat up], then press <©>.For still photos, set t

NomenclatureFlash-sync contactsEyecup(p.40)<ISO> ISO speed setting button (p.64,144)— •=:FEL> FE lock/ Multi-spot metering/ Movie shooting bu

Viewing the Images on TVYou can view the still photos and movies on a TV set. Before connecting or disconnecting the cable between the camera and tele

Viewing the Images on TVViewing on HD (High-Definition) TV SetsThe HDMI Cable HTC-100 (sold separately) is required.iConnect the HDMI cable to thecame

O—nProtecting ImagesProtecting the image prevents it from being erased accidentaliy.Protecting a Single Image<1 Select the image to be protected.•

• Protecting ImagesSIf you format the card (p.50), the protected images will also be erased.To protect an image, press and quickly let go of the butt

Recording and Playing Voice Memos You can append a voice memo to a captured image. The voice memo wili be saved as a WAV sound fiie having the sam

# Recording and Playing Voice MemosPlaying a Voice MemoWhen [P. C.Fn IV -9: button function] is set to [2: Piay memo (hoid; Recordmemo)] (p.231), the

S Copying Images mmmmmmmmmmmmmmmmThe images recorded in a card can be copied to the other card.iig?Bl Copying Individual ImagesI <1 Select [Image

^ Copying ImagesTotal images selected®CBpy targetCopy to CatiU Sdeet target foMer to copy toy| Select the image.• Turn the <0> dial to select t

© Copying ImagesCopy finishedImages to copy Copied images Images not copied► The copying will start and the progress will be displayed.When the cop

Erasing ImagesYou can either select and erase images one by one or erase them in one batch. Protected images (p.172) will not be erased.^ Once an imag

NomenclatureMetering mode selection/Flash exposure compensation button (p.104/119)<MODE> Shooting mode selection button (p.106,127,143,144)<A

Changing Image Playback SettingsIMin Adjusting the LCD Monitor BrightnessYou can adjust the brightness of the LCD monitor to make it easier to read.I

Changing Image Playback SettingsSetting the Image Review TimeYou can set how long the image is displayed on the LCD monitor immediately after capture.

Changing Image Playback SettingsAuto Rotation of Vertical ImagesVertical images are rotated automatically so they are displayed vertically on the came

Sensor CleaningThe camera has a Self Cleaning Sensor Unit attached to the image sensor's front layer (low-pass filter) to shake off dust automati

Automatic Sensor CleaningWhenever you set the power switch to <ON/J> or <OFF>, the Self Cleaning Sensor Unit operates to automatically sha

lilNkMlj Appending Dust Delete DataNormally, the Self Cleaning Sensor Unit will eliminate most of the dust that might be visible on captured images. H

liiaiJUJ Appending Dust Delete DataDust Delete DataPhotograph a solid-white object.• At a distance of 20 cm - 30 cm/0.7 ft. -1.0 ft., fill the viewfi

шиш Manual Sensor CleaningDust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc.The surface of t

Manual Sensor CleaningOWhile cleaning the sensor, never do any of the following, if the power is cut off, the shutter will close and the shutter curta

Printing ImagesPrinting (p.190)You can connect the camera directly to a printer and print out the images in the card. The camera is compatible with “P

Nomenclature<MENU> Menu —: button (p 44) IStrap mount-----(p26)- <INFO.> Info/Trimming orientation button (p,128,148,156.246/197)Card slot

Preparing to PrintThe direct printing procedure is done entireiy with the camerawhile you look at the LCD monitor.Connecting the Camera to a PrinterSe

Preparing to PrintPictBridgePlayback the image.• Press the <CEI> button.► The image will appear, and the <f(> icon will appear on the uppe

PrintingThe screen display and setting options will differ depending on the printer. Some settings might not be avaiiable. For detaiis, see the printe

/^/’PrintingResetting the Paper Size"f)- ij tkIjltltoiiICntflilcrnCi0ditCanlri• Turn the <0> dial to select the size of the paper loaded in

r( PrintingSet the printing effects.• Set as necessary. If you need not set any printing effects, go to step 5.• Turn the <0> dial to select t

PrintingTrimrnkigPaper set№9£HllDefPuilCancel^5onjeredPrint Set the date and file number imprinting.• Set as necessary.• Turn the <Q> dial to

PrintingHI Adjustment of Printing EffectsIn step 4 on page 194, select the printing effect. When the < 11 1 > icon is displayed next to <IHE5

PrintingTrimming the ImageTilt correction You can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming ri

PrintingDepending on the printer, the trimmed image area might not be printed as you specified.The smaller you make the trimming frame, the grainier t

1^ Digital Print Order Format (DPOF)You can set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all pr

Thank you for purchasing a Canon product.The EOS-1 D Mark IV is a top-of-the-line, high-performance EOS DIGITAL SLR camera featuring a large, fine-det

NomenclatureViewfinder informationCenter spot metering circle Focusing screenArea AF frameAF point □ : Cross-type AF points [j: AF points<1S0> I

Digital Print Order Format (DPOF)Option DescriptionPrint type0Standard Prints one image on one sheet.0Index Multiple, thumbnail images are printed on

rt Digital Print Order Format (DPOF)Print Ordering• Sel.ImageQuantityTotal images selectedIndex iconSelect and order images one by one. Press the <

i> Direct Printing with DPOFWith a PictBridge printer, you can easily print images with DPOF.1 Prepare to print.• See page 190. Follow the "C

Customizing the CameraTo suit your shooting preferences, you can fine-tune the camera's functions, save the camera settings to a card i or regist

Setting Custom FunctionsC.Fn I.Exposure C.FnIi: image/Flash exp/Disp C.FnilI:Autofocus/'OriVe C,FnR/:Operation/Oihers Clear all Custom Func. (C.F

E1Z01 Custom FunctionsC.Fn 1; ExposureA LV ’ Movie shooting shooting1Exposure level incrementso2ISO speed setting incrementsp208oIn M movie mode34Set

ffiPJLii Custom FunctionsC.Fn II; Image/Flash exposure/DisplayC.Fn III; Autofocus/Drive1Long exposure noise reductionp.2142High ISO speed noise reduct

Custom Functions13AF point dispiay during focusp.225With AFB14AF point brightnessWith AFB15 AF-assist beam firingWith AFB16 Orientation iinked AF poin

Custom Function SettingsCustom Functions are organized in four groups based on the function type: C.Fn I; Exposure, C.Fn II: Image/Flash exp (exposure

Custom Function SettingsC.Fn I -4 Bracketing auto cancel0: OnThe AEB and WB-BKT settings will be canceled if you set the power switch to <OFF> o

NomenclatureTop LCD PanelShutter speed - Bulb (buLb)Bulb exposure time (min.:sec.) FE lock (FEL)Busy (buSY)Error (Err)Sensor cleaning (CLn)ISO speed--

Custom Function SettingsC.Fn I -7 Spot metering link to AF point0; Disable (use center AF point)1: Enable (use active AF point)If [.IS.C.Fn III -10: S

Custom Function SettingsC.Fn I *10 Select usable metering modesDisable; All the metering modes (CS: Evaluative, E3: Partial, CO: Spot, CD: Center-weig

Custom Function SettingsC.Fn I -14 Apply shooting/metering modeWhile holding down the <*> (AE lock) button, you can switch to the regtsiered set

ИШЛ Custom Function SettingsC.Fn I '16 AE MicroadjustmentNormally, this adjustment Is not required. Do this adjustment only if necessary. Note th

Custom Function SettingsC.Fn II: Image/Flash exposure/DlsplayC.Fn II -1 Long exposure noise reduction0: Off1: AutoFor 1 sec. or longer exposures, nois

Custom Function SettingsC.Fn II -3 Highlight tone priority0: Disable 1: EnableImproves the highlight detail. The dynamic range is expanded from the st

Custom Function SettingsC.Fn II -6 Shutter curtain sync.0: tst-curtaln synchronization 1; 2nd-curtain synchronizationThe flash fires immediately befor

Custom Function SettingsC.Fn II -9 LCD panel Mlummation during Bulb0: Off1: On during BulbIf the LCD panel illumination Is on (p.116) and you take a b

Custom Function SettingsC.Fn III: Autofocus/DriveC.Fn JH -1 USM Jens electronic MFThe USM lens electronic MF can be enabled or disabled when you use a

Custom Function Settings2; Release/Drive speed priorityFor the first shot, shutter release is given priority over focusing the subject. During continu

NomenclatureRear LCD PanelExternal media selection- icon*^SD card indicator-selection iconCF card - indicatorCF card -selectioniconExternal media conn

Custom Function SettingsC.Fn III *6 Lens AF stop button function' The AF stop button is provided only on super telephoto IS lenses.0; AF stop 1:

Custom Function SettingsC.Fn III -7 AF MicroadjustmentNormally, this adjustment is not required. Do this adjustment oniy if necessary. Note that doing

Custom Function SettingsC.Fn III -8 AF expansion with seiected pointDuring manual AF point seiection, it is possibie to activate the AF points surroun

laiajm Custom Function SettingsCFn III '9 Multi-controller while metering0: Off1: AF point selectionDuring viewfinder shooting while the metering

Custom Function SettingsC.Fn III -11 Switch to registered AF pointYou can instantly switch to the registered AF point with <>:•?> or the <

Custom Function SettingsC.rn III ‘13 AF point display during focus0: On 1:OffThe AF point will not light in red other than during AF point selection.

Custom Function SettingsC.Fn III -16 Orientation iinked AF pointYou can either use the same AF point or a different AF point for vertical and horizont

Custom Function SettingsC.Fn III -19 Limit continuous shot countDisable: Continuous shooting is not limited to any number of shots.Continuous shooting

Custom Function SettingsC.Fn IV -3 Quick Control Dial in meteringThe Quick Control Dial’s function while the metering is active can be changed.0: Expo

Custom Function SettingsC.Fn IV -4 Assign SET buttonYou can assign a frequently-used function to <©>. Press <©> when the camera is shootin

NomenclatureShooting Settings DispiayApertureISO speedShutter speed------BULB; BulbShooting mode —P : Program AE Av: Aperture-priority AEM Manual expo

Custom Function SettingsC.Fn IV -6 Dial direction during Tv/Av0: Normal1: Reverse directionThe dial's turning direction for setting the shutter s

Custom Function SettingsC.Fn IV -9 button function0: Protect (hold: Record memo)When you hold down the button for 2 sec., you can startrecording a v

Custom Function SettingsC.Fn (V-11 Start movie shooting0; Default (from LV)1: Quick start (<FEL> button)If the [♦• Live View/Movie func. set.] m

Custom Function SettingsC.Fn IV -13 Timer length for timerHow long the function setting remains in effect after you let go of the respective button ca

Custom Function SettingsC.Fn IV -15 Add aspect ratio informationDuring Live View and movie shooting, verticai lines corresponding to the aspect ratio

1Л1^ли Registering and Applying Custom Function Settings You can register up to three sets of Custom Function settings.You can register a different s

Registering and Applying Custom Function SettingsThe settings for [ffi.C.Fn I -16: AE Microadjustment], [fS.C.Fn I -17: FE Microadjustment], [,f!f.C.F

Registering Му MenuUnder the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently.Select [My

Saving and Loading Camera SettingsThe camera’s shooting modes, menus, Custom Functions, and other camera settings can be saved in the card as a camera

1й1^Л11 Saving and Loading Camera SettingsSaved Settings• Shooting functionsShooting mode + setting, ISO speed, AF mode, AF point, Metering mode. Dri

NomenclatureBattery Pack LP-E424

Registering and Applying Basic Camera Settings You can set the basic settings of major functions such as the shooting mode, AF mode, metering mode, a

ReferenceThis chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to make

Function Availability Table• : Set automatically O: User selectable □ : Not selectable/DisabledpTVAvMBulbImage sizeJPEGoo oooRAWooo ooRAW+JPEGoo oooIS

Function Availability Table: Set automatically O: User selectable Щ]: Not selectable/lnvalldVlewflndar S hootingp IVАумBulbOne-Shotо о о ооAl Servoо о

System MapFocusing Screen Ec244

System Map£\►•a1JJ SI□J 1Timer Remote Remote Controller SwitchTC-80N3 RS-80N3External microphone

INFO. Checking Camera SettingsWith [.Si'.C.Fn II -10: INFO, button when shooting] (p.217) set to [1: Displays camera settings], pressing the <

Checking the Battery InformationYou can check the battery's condition on a menu screen.Select [Battery info.].• Under the [fr'] tab, se

Replacing the Date/Time BatteryThe date/time (back-up) battery's service life is approx. 5 years. If the date/time is reset when the camera is tu

Troubleshooting Guide _If there is a problem, first refer to this Troubleshooting Guide on pages 249 to 255. If this Troubieshooting Guide does not re

NomenclatureBattery Charger LC-E4Charger for Battery Pack LP-E4 (p.28).Battery pack SlotCharge level/ Calibration (Discharge) status indicator/ Perfor

Troubleshooting GuideThe camera turns off by itself.• Auto power off is in effect. If you do not want auto power off to take effect, set (V Auto power

Troubleshooting GuideA darker exposure was set with exposurecompensation, but the image looks bright.• Set [.P.C.Fn II -4: Auto Lighting Optimizer] t

Troubleshooting GuideThe flash always fires at full output.• If you use a flash unit other than an EX-series Speedlite, the flash will always be fire

Troubleshooting GuidemMovies cannot be shot with manuai exposure.• Set [LV set.] to [Movies] and set the shooting mode to <M>(manual exposure)

Troubleshooting GuideWhen the movie is played, camera operation noise can be heard.• If you operate the camera’s dial or lens during movie shooting, t

Troubleshooting GuideThe file numbering does not start from 0001.• If you use a card which already has Images recorded, the file numbering might star

Error CodesError No. If there is a problem with the camera, an error message will appear. Follow the onscreen instructions.Communications bemeen the

Specifications•TypeType:Recording mediaImage sensor size: Compatible lenses:Lens mount:• Image SensorType:Effective pixels: Aspect ratio:Dust delete f

Specifications• Image ProcessingPicture Style;White balance:Noise reduction: Automatic image brightness correction: Highlight tone priority: Lens peri

Specifications• Exposure ControlMetering modes:Metering range:Exposure controi:iSO speed: (Recommended exposure index) Exposure compensation:AE iock:S

NomenclatureAttaching the Neck Strap and Hand Strap Using the Cabie Protector Strap Cable ProtectorHand strap (Sold separately)<1 After attaching

Specifications• External SpeedliteCompatible flash:Flash metering;Flash exposure compensation:FE lock;PC terminal:Standard flash exposure level adjust

SpecificationsISO speed:Sound recording:Grid display:• LCD MonitorType:Monitor size and dots: Coverage:Brightness adjustment: Interface language:* Ima

Specifications• Custom FunctionsCustom Functions;C.Fn setting registration: Save camera settings: Register basic camera settings;My Menu registration;

Specifications• Dimensions and WeightDimensions (W x H x D): 156 x 156 6 x 79.9 mm / 6 1 x 6 2 x 3 1 in.Weight: Approx 1180g/416oz (body only)• Opera

Trademarks• Adobe is a trademark of Adobe Systems Incorporated.• Windows is a trademark or registered trademark of Microsoft Corporation in the Unit

Use of genuine Canon accessories is recommendedThis product is designed to achieve exceilent performance when used with genuine Canon accessories. Can

Safety WarningsFollow these safeguards and use the equipment properly to prevent injury, death, and material damage.Preventitrg Serious Inj

If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrica

European Union (and EEA) only.These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE Direc

Index10-sec or 2-sec. delay...1280x720...1920x1080...Ist-curtain sync...2nd-curtain sync...

Getting StartedThis chapter explains preliminary steps and basic camera operations.Minimizing Dust• When changing ienses, do it quickly in a place wi

IndexColor temperature setting...78Color tone...68, 196Compression rate...63Continuous

FocusingAF mode...94AF point display...158AF point selection...97AF-assist beam...

IndexLCD monitor...13, 17Brightness adjustment...180Image playback...156Menu screen...

NTSC...151, 170Number of AF points...223ONE SHOT (One-Shot AF)...95One-Shot AF ...

Index0 button...44Sharpness...68Shooting informationdisplay...

CanonCANON INC.30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Europe, Africa & Middle East CANON EUROPA N.V.PO Box 2262,1180 EG Amstelve

Charging the Battery<1 Connect the charger to a power outlet.• Connect the power plug to a power outlet, and connect the power cord to the charger

Charging the BatteryTips for Using the Battery and Charger• Recharge the battery on the day before or on the day it is to be used.Even during storage

Item Check ListBefore starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer.Ca

Charging the BatteryUse the Car’s Cigarette Lighter Socket to Recharge the BatteryWith Car Battery Cable CB-570 (sold separately), you can connect the

Charging the Battery7 All Three Charge Level Indicators Blink• If all three Charge level indicators blink in green, it means that the battery's

Installing and Removing the BatteryInstalling the BatteryInsert a fully charged Battery Pack LP-E4 into the camera.Removing the Batterycap.Insert the

Using a Household Power Outlet (Sold separately) mWith AC Adapter Kit ACK-E4 (sold separately), you can connect the camera to a household power outlet

Turning on the PowerPower/Quick Control Dial Switch<OFF> : The camera is turned off and does not operate. Set to this position when not using th

Turning on the PowerChecking the Battery LevelWhen the power switch is set to <ON>, the battery level will be indicated in one of six levels:pIS

Installing and Removing the CardThe camera can use a CF card and SD card. Images can be recorded when at least one card is installed in the camera.If

Installing and Removing the CardShots remaining_LISORr OfSiHOTlcc1 ° 1nwfji-2.‘1. .O. .*2. f3Card selection Icon CF card Indicator SD card Indicatory|

Installing and Removing the CardRemoving the CardOpen the cover.• Set the power switch to <OFF>.• Make sure the access lamp is off, then open

Attaching and Detaching a LensAttaching a LensRemove the caps.• Remove the rear lens cap and the body cap by turning them as shown by the arrow.Attach

Conventions Used in this ManuaiIcons in this Manuai<i5i> : Indicates the Main Dial.<0> : Indicates the Quick Control Dial.; Indicates th

Basic OperationAdjusting the Viewfinder ClarityRemove the eyecup.• While grasping both sides of the eyecup, slide it upward to remove.Make the adjust

Basic OperationShutter ButtonThe shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button

Basic OperationMaking Selections with the Main Dial(2)After pressing a button, turn the dial.When you press a button, its function remains seiected fo

Basic OperationO Making Selections with the Quick Control DialBefore using the <0> dial, set the power switch to < J>.After pressing a but

Menu Operations wmmmmmmmmmmmmmmmmmmYou can set various settings with the menus such as the beeper, date/ time, etc. Whiie looking at the LCD monitor,

Menu OperationsMenu Setting ProcedureJPEG quitttV )m»g« size I' Review tHM 2 secBeuD OffRelease shutter without card Dusi Delete Data External

Menu SettingsO' Shooting 1 (Red) PageWhite balance0» / -# / ttk / * / ijff- / B / 4 / lA. (1 - 5) / Q (2500- 10000)/PC-1 -572Cu

Menu SettingsE' Playback 2 (Blue)PageHighlight alert Disable / Enable157AF point displayDisable / Enable158HistogramBrightness / RGB158Enlarge di

Menu SettingsV- Set-up 3 (Yellow)PageSave/load settings on mediaSave/load camera settings to/from the card238Regist/apply basic settingsThe camera&apo

Before You Start insetting the Interface LanguageSelect [Language^)].• Under the [fr'] tab, select [Language 0] (the third item from the top),

ChaptersIntroductionCamera basics.21Getting Started271Image SettingsImage-recording quality, ISO speed, Picture Style, etc.553Setting the AF and Drive

Before You StartFormatting the CardIf the card is new or was previously formatted by another camera or personal computer, formatting the card with the

Before You Start(I151When the card is formatted or data is erased, oniy the fiie management information is changed. The actuai data is not completeiy

Before You StartSet the Power-off Time/Auto Power OffTo save battery power, the camera turns off automatically after a certain time of non-operation.

Before You StartIBID Reverting the Camera to the Default SettingsThe camera’s shooting settings and menu settings can be reverted to the default.near

Before You StartCamera SettingsLive View/Movie Shooting SettingsAuto power off1 min.BeepOnRelease shutter without cardEnableReview time2 sec.Highlight

Image SettingsThis chapter explains image-related function settings: Image-recording quality, ISO speed, Picture Style, white balance. Auto Lighting O

Selecting the Card to Record or Playback mQJ This Instruction Manual assumes that a CF card or SD card is in the camera. When an external media is use

Selecting the Card to Record or PlaybackRecording Method with Two Cards insertedIf both the CF card and SD card are inserted into the camera, you can

Selecting the Card to Record or PlaybackE3 • When [Auto switch media] is set, the card for recording wiil switch from ID to © to 0.• When [Rec. separa

Setting the Image-recording QualityYou can set the image size (recorded pixels), image type (JPEG or RAW), and JPEG quality (compression rate).Selecti

Contents IIntroductionItem Check List... 3Conventions Used in th

Setting the Image-recording QualityUsing the Menu Screen to Set the Image Size <1 Select [Image size].• Under the [Qi'] tab, select [Image siz

Setting the Image-recording QualityGuide to Image-recording Quality Settings (Approx.)Image SizePixelsRecordedPrint SizeFile Size (MB)PossibleShotsMax

Setting the Image-recording QualityAbout RAWA RAW image is the raw data output by the image sensor, converted to digital data and recorded on the card

Setting the Image-recording QualityIMIB Setting the JPEG Quality (Compression Rate)The recording quality (compression rate) can be set for each image

ISO: Setting the ISO SpeedSet the ISO speed (image sensor's sensitivity to iight) to suit the ambient light level.Press the <ISO> button. (

ISO: Setting the ISO SpeedAbout “A” (Auto) ISO SpeedIf the ISO speed Is set to “A", the actual ISO speed to be set will be displayed when you pre

Selecting a Picture StyleBy selecting a Picture Style, you can obtain image effects matching your photographic expression or the subject.Press the bu

m* Selecting a Picture StyleNeutralThis Picture Style is for users who prefer to process images with their computer. For natural colors and subdued im

You can customize a Picture Styie by adjusting individuai parameters like [Sharpness] and [Contrast], To see the resulting effects, take test shots. T

Customizing а Picture Styie[^ • By selecting [Default set.] in step 3, you can revert the respective Picture Style to its default parameter settings,

ContentsRegistering a Picture Style...70Setting the White Balance...

You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def

Registering a Picture StylePictijrt stywUserOif. I UnSscjp!O» C0.£ O.CO ^ ^ ¿wifKffiiiea i»iSet the parameter.• Turn the <0> dial to set the p

Setting the White BalanceWhite balance (WB) is for making the white areas look white. Normally, the <EHD> (Auto) setting will obtain the correct

Custom White BalanceCustom white balance enables you to manually set the white balance for a specific light source for better accuracy. Up to five Cus

1 Custom White BalancePhotograph a solid-white object.• The plain, white object should fill the center spot metering circle.• Focus manually and set

I Custom White BalanceRegister image on cardFirst follow step 4 under “Capture and register the image” (p.73, 74) to take a picture of a plain, white

csAa Custom White BalanceSelecting and Shooting with the Custom WB dataRegistered imageCustom WB regist.Register image on card Record and register ima

j Custom White BalanceCustom WB ro9lstRnicter ntia« DO nrD SSCDtlfllli'WlsKr ImsjcSelect [Edit caption].• Turn the <0> dial to select [Edit

You can set the white balance’s color temperature numerically in Kelvin. This is for advanced users.*1 Press the <FUNC.> button. ((2)6)• Press t

K! White Balance CorrectionYou can correct the white balance that has been set. This adjustment wili have the same effect as using a commercialiy-avai

ContentsLive View ShootingO Preparing for Live View Shooting...126A Live View Shooting...

B! White Balance CorrectionWhite Balance Auto BracketingWith just one shot, three images having a different coior baiance can be recorded simuitaneous

If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. With JPEG images, the correction is do

Lens Peripheral Illumination Correction wmDue to the lens characteristics, the four corners of the picture might iook darker. This is caiied iens ligh

й1Я|?ч| Lens Peripheral Illumination CorrectionAbout the Lens Correction DataThe camera already contains lens peripheral illumination correction data

liNMUj Creating and Selecting a FolderYou can freely create and select the folder where the captured images are to be saved.This is optional since a f

Selecting a FolderLowest file number Number of images in folderCreating and Selecting a FolderWith the Select folder screen displayed, turn the <0&

(Ex) BE3B0001.JPGMW Changing the File NameThe file name has four alphanumeric characters followed by a four-digit image number (p.88) and extension. T

Changing the File NameF№ fitting1 Flic n iu№—f1DM4 IhKi -I- IflUPrssa a u kec3BJLhssMjneiI0M4llH S litn mlIM G 4 utia« : t h tSettingsExit the setting

IAI44U File Numbering MethodsThe four-digit file number is like the frame number on a roll of film. The captured images are assigned a sequential file

File Numbering MethodsAuto ResetThe file numbering restarts from 0001 each time the card is replaced or a new folder is created.Even after you replace

Contents8 Sensor Cleaning,*□» Automatic Sensor Cleaning...184Appending Dust Del

Setting Copyright informationWhen you set the copyright information, it wiii be appended to the image as Exit information. You can check the entered c

Setting Copyright InformationChecking the Copyright informationWhen you select [Display copyright info.] in step 2 on the preceding page, you can chec

mUD Setting the Color SpaceThe color space refers to the range of reproducible colors. With this camera, you can set the coior space for captured imag

Setting the AF and Drive ModesThe Area AF frame has 45 AF points (39 high-precision crosstype points and 6 AF points). You can select any one of the

AF: Selecting the AF ModeSelect the AF mode suiting the shooting conditions or subject.On the lens, set the focus mode switch to <AF>.Press the

AF: Selecting the AF ModeOne-Shot AF for Still SubjectsI AF point \Focus confirmation lightSuited for still subjects. When you press the shutter butt

AF: Selecting the AF ModeAl Servo AF for Moving SubjectsThis AF mode is for moving subjects when the focusing distance keeps changing. Whiie you hoid

inZ] Selecting the AF PointSelect one of the 45 AF points to autofocus. Manual selection enables you to select one of the 45 AF points. And automatic

EE Selecting the AF PointSelecting with the DialTo select a horizontal AF point, turn the dial.To select a vertical AF point, turn the <0> dial.

EB Selecting the AF PointMaximum f/stop:[Manual selection]Up to f/2.8With the 39 AF points indicated by I, high-precision, cross-type AF (both horizon